Your Cart

Product Quantity

Subtotal: £0.00

You will be charged at checkout.

Part number: PS076

Single Sided Foam Tape for Water, Air or Dust Sealing, Cushioning, Gap-filling or Anti-slip Mounting with Acrylic Adhesive.

Product Details

Product information

Packstat PS076 is a Medium hard blackPVC foam compression sealant. The foam is predominantly closed celled and is a medium hardness foam An acrylic pressure sensitive adhesive is coated on one side, and the product has a paper release liner on the other non-adhesive face. It will act as a water/air/dust seal when compressed. PS076 is UV light resistant.

Applications Include:-

  • Forms a compression water seal
  • Forms a compression air / dust seal
  • For preventing electrolytic corrosion
  • For gap filling
  • For cushioning
  • For anti-slip mounting
  • For replacing Chloroprene foam seal

Typical Markets:-

  • Construction
  • Glazing
  • HVAC
  • Industrial assembly
  • Roofing & cladding


  • Fire rated to DIN 4102 part 1, B2
  • Conforms to European Directive 2000/53 EC (Lead, Chromium VI, Mercury, Cadmium free)
  • AbP DIN EN 13501-1:2010 Class E.
  • Fire rated DIN 4102 B2.
  • Full contact with Dow Corning Silicon sealants.

Features and Benefits

  • Minimum 30% compression required to effect a water seal.
  • Service temperature –30°C to +70°C
  • Application temperature: +10°C to + 40°C
  • Coated on one side with a high-quality pressure sensitive acrylic adhesive.
  • Good resistance to dilute acids & alkalis.
  • Paper release liner on the non-adhesive face, reducing dimensional change during application.
  • Very good Ultra violet {UV} Light resistant.
  • Resistance to abrasion, corrosion and moisture.
  • Suitable for indoor and outdoor environments.
  • Medium hardness multi-purpose foam seal, with similar properties to Neoprene.
  • No known hazards associated with this product.
  • Pre-determined dimensional sealant reduces waste.
  • Clean to use.
  • Clean edge finish.
  • Force to compress by 30%: 3.2 cNcm2
  • Elongation at Break: >155%
  • Tensile Strength:30 Ncm²
  • Foam Density: 130 (12 & 15mm 150) Kg/m³
  • Shore Hardness {OO} Scale: 35“00”
  • Compression deflection after 1 minute: 2.7 Ncm2
  • 10-minute 180° Peel Adhesion: 5 N/25mm
  • Thickness: 1.5, 3.0, 4.5, 6.0, 7.5, 9.0, 10.5, 12.0, 15.0 mm
  • Thermal Conductivity (k):0.052 Wm¹ K¹