Double Sided White PE Foam Tape with High Performance Acrylic Adhesive, 1 and 2mm Thick
Part number: PS180
1mm or 2mm Thick, White High Performance Double-sided Polyethylene Foam Bonding Tape with an Acrylic Pressure Sensitive Adhesive.
Product Details
Product information
PS180 is a white high performance double-sided foam bonding tape. The Polyethylene foam is predominantly closed celled. An acrylic pressure sensitive adhesive is coated on both sides, and the product has a paper release liner. The material can be supplied with a film liner facilitating automated application if required.
Its applications include:-
- Mirror mounting.
- Mounting glazing bars.
- Mounting cable trunking.
- Crystalline silicon PV panel frame bonding.
- General mounting / bonding.
Accreditations:-
- Conforms to European Directive 2000/53 EC (lead, chromium VI, mercury, cadmium free)
- LGA Quality Certificate No. LI 60116108 001 ‐ German Furniture Institute – mirror bonding
- IEC 61215:2005 approved – Photovoltaic (PV) panel frame bonding
Features and Benefits
- Maximum recommended weight loading of 15g/cm².
- Service temperature: -40°C to +100°C.
- Application temperature: +10°C to +40°C.
- Minimum 20% compression required to effect a water seal.
- Coated on both sides with a high quality pressure sensitive acrylic adhesive.
- Good resistance to dilute acids and alkalis.
- Paper release liner, reducing dimensional change during application.
- Very good ultraviolet {UV} light resistance.
- Resistance to abrasion, corrosion and moisture.
- Suitable for indoor and outdoor environments.
- No known hazards associated with this product.
- May be used with Perspex and Polycarbonate.
- Pre-determined dimensional sealant reduces waste.
- Clean to use.
- 10 Minute180° Peel Adhesion: 18 N/(25mm)
- 500 hour Static Shear (Stainless Steel): 0.16 Kg/cm²
- Dynamic Shear: 41 N/cm²
- Colours: White
- Carrier: PE Foam
- Adhesive: Acrylic
- Thickness: 1.0; 2.0mm
- Liner: Paper release liner can be supplied with film liner.
